Canon imagePROGRAF iPF605 - Manual (Page 534)

Problems with the printing quality
The surface of the paper is dirty
Cause Corrective Action
The Paper Retainer is soiled. Clean the Paper Retainer.
(→P.498)
You are using a paper that does not dry easily. Specify a time of about a minute in Roll DryingTime.
The back side of the paper is dirty
Cause Corrective Action
The Platen has become dirty after borderless printing
or printing on small paper. Open the Top Cover and clean the Platen.
(→P.495)
The Paper Retainer is soiled. Clean the Paper Retainer.
(→P.498)
Roller marks are left across the trailing edge of paper
Cause Corrective Action
Following the instructions, press the Load/Eject
button, remove the paper, and then press the OK
button. A document was removed after printing from
the Front Paper Feed Slot without pressing the
Load/Eject button.
Wipe away any soiling on the rollers.
(→P.495)
(→P.498)
520 Troubleshooting