Canon imagePROGRAF iPF605 - Manual (Page 517)

Other Maintenance
12.
Grasp the Belt, insert it between the Belt Stopper, and afx the Belt Stopper to the Carriage Shaft.
Important
• Never touch the Linear Scale (a) or Carriage Shaft (b).
Note
• Here, the Belt Stopper is the one that was removed and stored after initial installation.
13.
Close the Top Cover.
14.
Tape down printer covers to secure them, in the reverse order of tape removal during installation.
15. Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package
them in a shipping box.
Maintenance 503