Canon imagePROGRAF iPF605 - Manual (Page 90)

Printer Specications
Printer Specications
Specications
Important
• This information is subject to change as the printer is updated.
• The following values may vary depending on the operating environment.
Printer
Power supply 100-120 V AC (50/60 Hz), 220-240 V AC (50/60 Hz)
In operation 100 W max.
Sleep mode 100-120 V: 5 W max.
(10 W max. when an IEEE 1394 (FireWire) expansion board is
installed.)
220-240 V: 6 W max.
(11 W max. when an IEEE 1394 (FireWire) expansion board is
installed.)
Power consumption
Off 1 W max. (*1)
Operating noise Approx. 49 dB (A) max.
Temperature 15-30°C (59-86°F) Operating
environment
Humidity 10-80%, non-condensing
Printer only 997Ч670Ч344 mm (39.3Ч26.4Ч13.5 in) Dimensions (W × D
× H)
With stand 997Ч870Ч991 mm (39.3Ч34.3Ч39.0 in)
Printer only 45 kg (99.2 lb) Weight
(not including the
Printhead and Ink
Tank )
With stand 60 kg (132.3 lb)
Printer only 1,297Ч1,770Ч644 mm (51.1Ч69.7Ч25.4 in) Space required for
installation (*2)
With stand 1,297Ч1,970Ч1,293 mm (51.1Ч77.6Ч50.9 in)
Applicable standards International Energy Star Program, Law on Promoting Green
Purchasing, GPN, RoHS, The Eco Declaration, WEEE, U.S.
presidential directives
*1: The printer uses a trace amount of power even when turned off. To stop all power consumption,
turn off the printer and unplug the power cord.
*2: Normally, you will need to ensure an unobstructed space of 800 mm (31.5 in) in front of the printer, 300
mm (11.8 in) behind, 150 mm (5.9 in) on both sides, and 300 mm (11.8 in) above the printer. Only
when printing from the Front Paper Feed Slot, leave 1,100 mm (43.3 in) of unobstructed space in front
of the printer and 700 mm (27.6 in) behind it.
76 Printer Parts