Hp-gl/2 problems, With hp-gl/2, printing is misaligned, Hp-gl/2 jobs are printed in monochrome (or color) – Canon imagePROGRAF iPF605 User Manual
Page 544
HP-GL/2 problems
HP-GL/2 problems
With HP-GL/2, printing is misaligned.
Cause
Corrective Action
The plotter origin is incorrect.
Check the printing commands.
Lines or images are missing in the HP-GL/2 data that
was printed.
Cause
Corrective Action
The memory is full.
Check the size of the data in the print job.
A GL/2 command not supported by this printer was
received.
Check the print job and settings.
Lines Are Printed Too Thick or Thin During HP-GL/2
Printing
Cause
Corrective Action
The Line Width setting in the main menu is incorrect. Conrm the selection in Line Width. If ne lines are
printed faint, setting ThickenFineLines to On in the
main menu will print the lines more distinctly.
(→P.55)
HP-GL/2 jobs are printed in monochrome (or color).
Cause
Corrective Action
The color mode is incorrect.
On the printer Control Panel, check the color mode
setting.
(→P.55)
For optimal printhead performance, the printer consumes trace amounts of color ink even in monochrome
mode.
Printed Colors in Line Drawings are Inaccurate During
HP-GL/2 Printing
Cause
Corrective Action
AdjustFaintLines in the main menu is set to On.
Selecting Off may help produce the expected results.
However, lines in some colors may appear broken.
530 Troubleshooting