Canon imagePROGRAF iPF605 - Manual (Page 558)

Messages regarding paper
Cannot feed paper.
Cause Corrective Action
The sheet cannot be fed correctly. Reload the sheet straight, in the correct position.
(→P.144)
Cannot cut paper.
Cause Corrective Action
There are sheets left on the Output Tray. Remove the paper.
There is a foreign object by the Output Tray,
obstructing the Cutter Unit. Remove the foreign object.
You are not using the printer under the recommended
environmental conditions for the paper. Use the printer only where the recommended
environmental conditions for the paper are met.
Note that various environmental conditions are
recommended for various types of paper. For details
on the recommended environmental conditions for
paper, see “Types of Paper”. (→P.101)
You are using paper that is not compatible with
automatic cutting. Cut the roll manually.
(→P.128)
The Cutter Unit stops in the middle of cutting. Move the Cutter Unit to the left, and then remove the
roll paper. If the roll cannot be cut using the Cutter
Unit, cut the roll manually.
(→P.128)
In other cases, the Cutter Unit may be damaged. Contact your Canon dealer for assistance.
End of paper feed.
Cause Corrective Action
You are pressing the ▲ button on the Control Panel
and trying to rewind the roll to the edge. Release the ▲ button.
544 Error Message