Canon imagePROGRAF iPF605 - Manual (Page 562)

Messages regarding printing or adjusment
Messages regarding printing or adjusment
Use another paper.
Cause Corrective Action
For automatic Printhead adjustment, we recommend
using a type of paper that you often use, other than
lm.
(→P.453) The Printhead and feed amount cannot be adjusted
when highly transparent lm is loaded.
Adjust the feed amount manually.
(→P.461)
Cannot print as specied.
Press Load/Eject and replace paper with A4/LTR (vertical) or larger
Cause Corrective Action
Paper has been loaded that is too small to
print the test pattern for printhead adjustment
or nozzle checking. Press the Load/Eject button and switch to paper A4/Letter,
vertical, or larger.
Press Load/Eject and replace roll with 10 in. wide or larger roll.
Cause Corrective Action
Paper has been loaded that is too small to
print the test pattern for printhead adjustment
or nozzle checking. Press the Load/Eject button and load a roll at least 10
inches (254 mm) wide.
Cannot adjust band.
Cause Corrective Action
The Printhead nozzles are clogged. Follow the steps below to check the nozzles.
1. Print a test pattern to check the nozzles.
(→P.479)
2. Clean the Printhead if the nozzles are clogged.
(→P.480)
Highly transparent lm is loaded that cannot be used
for feed amount adjustment. Adjust the feed amount manually.
(→P.461)
Cannot adjust printhead.
Cause Corrective Action
The Printhead nozzles are clogged. Follow the steps below to check the nozzles.
1. Print a test pattern to check the nozzles.
(→P.479)
2. Clean the Printhead if the nozzles are clogged.
(→P.480)
Highly transparent lm is loaded that cannot be used
for Printhead adjustment. We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.453)
548 Error Message