Anritsu ME7840A - Manual (Page 27)

Chapter 2
Installation
2-1
INTRODUCTION This chapter describes the installation, connection and set-up of the
equipment that comprises the ME7840A Power Amplifier Test Station.
2-2
EQUIPMENT
COMPLEMENT The ME7840A is made up of the following pieces of equipment:
q Scorpion
â Vector Network Measurement System (VNMS), Direct
Receiver Access (DRA) version:
Model MS4622C (10 MHz to 3 GHz) or
Model MS4623C (10 MHz to 6 GHz)
q Model MS4782X Power Amplifier Test Set
q System measurement software
q Current probe(s) (optional item)
q One or more external circulators (optional item, for use with
MS4782D Test Set
q Accessory Kit: Includes interconnect cables and 50 W terminations
for Aux ports
2-3
UNPACKING and
INSPECTION The ME7840A equipment has been securely packaged. The packaging
material and container should be retained in case the equipment must be
re-shipped or placed into storage.
The MS4622C or MS4623C DRA Scorpion
â VNMS and the MS4782X
Test Set are each packed within heavy cardboard boxes.
Step 1. Carefully cut the sealing tape on the top box surface with a
packing knife.
Step 2. Open the box lids, and remove the upper layer of foam mate-
rial.
Step 3. Lift the equipment from the boxes. Two persons should do
this, as the equipment is heavy and bulky.
ME7840A OMM 2-1