Power level 4-4, General 4-3,5-1 - 3, General -3 – Anritsu ME7840A User Manual
Page 46: Power level operations, calibration
Advertising
sure that the equipment is properly connected to the bus. If
so, the following screen will be displayed:
Step 3.
Click on “Run Calibration Procedure” to display a list of cali-
bration specification files (below). (Refer to paragraph 4-3 for
a description of these files.) Running the files is described in
succeeding numbered paragraphs.
4-6
POWER LEVEL
The A_Power Level.txt specification file provides prompts for a power
level calibration. Proceed as follows:
Step 1.
Zero-set the power sensor for accurate measurement in fol-
lowing steps.
Step 2.
Select “Tools” then “Run Calibration Procedure.”
POWER LEVEL
OPERATIONS, CALIBRATION
4-4
ME 7840A OMM
Advertising