Common causes of jams, Enww common causes of jams 117 – HP LaserJet 5200 Printer series User Manual

Page 129

Advertising
background image

Common causes of jams

The printer is jammed.

1

Cause

Solution

The media does not meet specifications.

Use only media that meets HP specifications. See

Paper

specifications on page 160

.

A component is installed incorrectly.

Verify that all print cartridges, the transfer unit, and the fuser
are correctly installed.

You are using media that has already passed through a printer
or copier.

Do not use media that has been previously printed on or
copied.

An input tray is loaded incorrectly.

Remove any excess media from the input tray. Make sure that
the stack is below the maximum stack height mark in the tray.
See

Configuring trays on page 53

.

The media is skewed.

The input-tray guides are not adjusted correctly. Adjust them
so they hold the stack firmly in place without bending it.

The media is binding or sticking together.

Remove the media, flex it, rotate it 180°, or flip it over. Reload
the media into the input tray.

NOTE:

Do not fan paper. Fanning can create static

electricity, which can cause paper to stick together.

The media is removed before it settles into the output bin.

Reset the printer. Wait until the page completely settles in the
output bin before removing it.

The media is in poor condition.

Replace the media.

The internal rollers from tray 2 are not picking up the media.

Remove the top sheet of media. If the media is heavier than
120 g/m

2

(32 lb), it might not be picked from the tray.

The media has rough or jagged edges.

Replace the media.

The media is perforated or embossed.

Perforated or embossed media does not separate easily. Feed
single sheets from tray 1.

Printer supply items have reached the end of their useful life.

Check the printer control panel for messages prompting you to
replace supplies, or print a supplies status page to verify the
remaining life of the supplies. See

Using printer information

pages on page 80

.

Paper was not stored correctly.

Replace the paper in the trays. Paper should be stored in the
original packaging in a controlled environment.

1

If the printer still continues to jam, contact HP Customer Support or your authorized HP service provider.

ENWW

Common causes of jams 117

Advertising