HP LaserJet 5200 Printer series - Manual (Page 74)

● Remove transparencies from the top output bin as they are printed to prevent them from sticking
together.
● Place transparencies on a flat surface after removing them from the printer.
● In the print driver or software program, set the tray 1 type to Transparency.
Printing on rotated media
The printer can print on letter, A4, A5, Executive, and B5 (JIS) print media in a rotated orientation (short-
edge first) from tray 1. The printer can print on letter and A4 media in a rotated orientation from tray 2.
Printing on rotated media is slower. Some types of media feed better when rotated, such as prepunched
paper (especially when it is printed on both sides) or labels that do not stack flat.
Printing from tray 1
1. On the PAPER HANDLING menu on the printer control panel, select TRAY 1
MODE=CASSETTE.
2. On the PAPER HANDLING menu, select the appropriate tray 1 size.
3. Load media with the side to be printed on facing up, and the top, short edge toward the printer.
4. In the printer driver or software program, select the paper size as you normally would and select
tray 1 as the media source.
Printing from tray 2
1. Set the paper-size dial (callout 1) and paper-size switch (callout 2) to the size of the paper that you
are loading.
Lock
2 1
62 Chapter 4 Printing tasks ENWW