HP LaserJet 5200 Printer series - Manual (Page 20)

installation. Accessories that the Driver Autoconfiguration supports are dual inline memory modules
(DIMMs). If the environment supports bidirectional communication, the installer presents Driver
Autoconfiguration as an installable component by default for a typical installation and for a custom
installation.
Update Now
If you have modified the configuration of the HP LaserJet 5200L printer since installation, the driver can
be automatically updated with the new configuration in environments that support bidirectional
communication. To change the configuration automatically, complete the following steps:
1. On the Windows taskbar, click Start, and then click Printers. Right-click the printer, and then click
Properties.
2. In the Properties dialog box, click the Device Settings tab.
3. Under Installable Options, click Automatic Configuration.
4. In the drop-down box, click Update Now, and then click Apply.
NOTE: The Update Now feature is not supported in environments where shared Windows NT® 4.0,
Windows 2000, or Windows XP clients are connected to Windows NT 4.0, Windows 2000, or
Windows XP hosts.
HP Driver Preconfiguration
HP Driver Preconfiguration is a software architecture and set of tools that you can use to customize and
distribute HP software in managed corporate printing environments. Using HP Driver Preconfiguration,
information technology (IT) administrators can preconfigure the printing and device defaults for
HP printer drivers before installing the drivers. For more information, see the HP Driver Preconfiguration
Support Guide, which is available at
www.hp.com/support/lj5200l .
Additional drivers
The following drivers are not included on the CD, but are available from www.hp.com/go/
lj5200l_software .
● UNIX® model scripts
● Linux drivers
8 Chapter 1 Printer basics ENWW