Troubleshooting linux problems – HP LaserJet 5200 Printer series User Manual
Page 152
When connected with a USB cable, the printer does not appear in the Macintosh Print Center after the driver is selected.
Cause
Solution
Hardware troubleshooting
●
Check that the printer is turned on.
●
Verify that the USB cable is connected correctly.
●
Check that you are using the appropriate high-speed USB
cable.
●
Ensure that you do not have too many USB devices
drawing power from the chain. Disconnect all of the
devices from the chain, and connect the cable directly to
the USB port on the host computer.
●
Check to see if more than two nonpowered USB hubs are
connected in a row on the chain. Disconnect all of the
devices from the chain and connect the cable directly to
the USB port on the host computer.
NOTE:
The iMac keyboard is a nonpowered USB hub.
Troubleshooting Linux problems
For information about Linux problem solving, go to the HP Linux support Web site:
140 Chapter 7 Problem solving
ENWW