HP StorageWorks XP10000 Disk Array - Manual (Page 105)

NOTE:
If nothing appears in the table cells to the right of a LUN, no path is defined to the LU. Therefore,
no alternative path is defined to the LU.
• In the LDEV table, right-click a logical volume (that is, an LDEV), and select Alternate Paths.
NOTE:
If nothing appears in the Paths column for a row in the LDEV list, no alternate paths are defined
to the LDEV corresponding to that table row.
When you finish the operation, the Alternate Paths pane appears and displays a list of alternate
paths. In the Alternate Paths pane, each table row indicates an alternate path.
Figure 56 Alternate Paths pane
NOTE:
The Group ID column indicates the host group's group numbers (G-IDs).
Using LUN security
To protect mission-critical data in the array from illegal access, you must secure the logical volumes in
the array. Use LUN Manager to secure LUs from illegal access by enabling LUN security on ports. For
more information, see Configuring LUN security .
By default, LUN security is disabled on each port. When configuring the system, you must enable
LUN security on ports.
HP StorageWorks LUN Configuration and Security Manager XP user guide for the
XP12000/XP10000/SVS200
105