HP StorageWorks XP10000 Disk Array - Manual (Page 62)

Figure 17 NAS folder
Table 8 NAS port icons
Icon Status
You can assign paths from this NAS port to logical volumes.
You cannot assign paths from this NAS port to logical volumes because of a hardware failure
or another reasons.
When you double-click a NAS port, the following host groups appear:
• NAS-Sys: When selected, information about paths to system LUs appears in the list on the right.
The list contents are grayed out and cannot be changed.
The group number (G-ID) of this host group is 00.
• User: When selected, information about paths to user LUs appears in the list on the right.
The group number (G-ID) of this host group is 01.
iSCSI folder
If you double-click the iSCSI folder, iSCSI ports in the array appear as icons. The port name and attribute
appear on the right of each icon.
NOTE:
•
The iSCSI folder does not appear if the array does not contain iSCSI channel adapters.
• iSCSI ports always have the Target attribute.
62 LUN Manager panes