Install cv pane (1) for other than open-v – HP StorageWorks XP10000 Disk Array User Manual
Page 180
Figure 93 Install CV pane (1) for other than OPEN-V
This pane has the following features:
•
Parity Group: Selected free space's VDEV number.
NOTE:
If a parity group number starts with E (for example, E1-1), the parity group consists of one or more
external LUs.
NOTE:
If a VDEV number starts with V (for example, V1-1-(1)), the VDEV belongs to a parity group that
consists of one or more virtual volumes (V-VOLs).
•
Emulation Type: Emulation type.
•
Capacity Unit: Unit (MB, Cyl, or block) in which the volume capacity is displayed.
•
Capacity: CVS volume's capacity in the unit selected in the Capacity Unit list. The available
capacity range (minimum - maximum) is shown on the right (for example, 46 - 6720 MB,
50 - 7168 Cyl, or 315 - 8513 blocks). The value can be incremented by 1 MB, cylinder, or block.
•
Set: Displays the selected settings in the LDEV information table on the left.
•
Delete: Deletes the settings for the CVS volumes selected in the LDEV information table.
•
LDEV information table: Displays the following information about the CVS volume settings:
• No.: CVS volume's setting number.
• Emulation: CVS volume's emulation type.
• Capacity: CVS volume's capacity displayed in the unit selected from the Capacity Unit list.
•
Available LDEVs: Number of LDEVs that can be created in the VDEV. The maximum is 512 LDEVs
for RAID5 (7D+1P) or RAID6 (6D+2P), and 256 LDEVs for other RAID levels.
•
Next: Displays the Install CV pane (2).
•
Cancel: Cancels the selected settings and returns to the Customized Volume pane.
180
Custom Volume Size operations