HP StorageWorks XP10000 Disk Array - Manual (Page 192)

• LDEV Boundary: Boundary area of an LDEV number with no SSID.
• SSID: Specified SSID. The default is blank.
• Input SSID: Used to select or enter the SSID. You can enter the SSID only when you log in as a
storage administrator.
• SSID number of another SLPR is used: When selected, you can select the number of an SSID that
does not exist in the SLPR to which the parity group does not belong. When cleared, you can
select only the number of an SSID in the SLPR to which the parity group belongs.
NOTE:
The SSID number of another SLPR is used check box appears only when you log in as a storage
administrator and when there are two or more SLPRs.
NOTE:
You cannot enter the number in the Input SSID list when the SSID number of another SLPR is used
check box is cleared.
• Set: Sets the SSID you select or enter in Input SSID list to the table. The Set SSID table displays
the new SSID.
• Back: Cancels the SSID setting, and returns to the Make Volume pane (2).
• Next: Displays the Make Volume pane (4) (confirmation pane).
• Cancel: Returns to the Customized Volume pane.
Make Volume pane (4)
Use this pane to confirm the settings of the CVS volumes to be created.
Figure 101 Make Volume pane (4) for confirming Make Volume settings
This pane has the following features:
• CVS volume-setting information table: Displays a list of CVS volumes to be created.
• VDEV: VDEV number for the CVS volume to be created. The VDEV number indicates the
parity group where the VDEV belongs. For example, if VDEV number 1-1-(1) appears, the
VDEV belongs to parity group number 1-1.
192 Custom Volume Size operations