HP StorageWorks XP10000 Disk Array - Manual (Page 191)

• If the selected LDEV number's boundary area does not have an SSID, the Make Volume pane
(3) for setting an SSID appears.
• If the selected LDEV number's boundary area has an SSID, the Make Volume pane (4) appears.
• Cancel: Cancels the settings for the LDEV, and returns to the Customized Volume pane.
• Clear: Removes a CU:LDEV number that is already assigned. To remove a CU:LDEV number,
right-click a CVS volume number corresponding to the CU:LDEV number you want to remove,
and select Clear.
Make Volume pane (3)
This pane appears when you create CVS volumes if the selected LDEV number's boundary area does not
have an SSID. You can set an SSID on the Make Volume pane (3).
Figure 100 Make Volume pane (3) for setting SSIDs
This pane has the following features:
• Set SSID information tree: Displays a hierarchical structure of SSID setting information that
contains CU numbers (for example, CU 00), SSID boundary areas (for example, 00-3F), and SSID
(for example, 0004). When the selected LDEV number's SSID boundary area has no SSID, the
following icon appears before the related CU number and the related LDEV boundary area. The
SSID of the boundary area having no SSID is ----.
Table 40 Set SSID tree icons (Make Volume)
Icon Description
CU number is not extracted.
CU number is extracted.
LDEV boundary area.
• Set SSID table: Used set the SSID boundary area.
• CU: CU number containing an LDEV boundary with no SSID.
HP StorageWorks LUN Configuration and Security Manager XP user guide for the
XP12000/XP10000/SVS200
191