Write to control blocks pane, Format all pane – HP StorageWorks XP10000 Disk Array User Manual
Page 199
Figure 106 Format All pane
CAUTION:
The Format All panel does not display virtual volumes.
•
Parity Group Type: Used to specify volumes to be formatted.
• All Type: Blocked volumes in all parity groups in the local and external arrays are formatted.
• Internal PG: Blocked volumes in all parity groups in the local array are formatted.
• External PG: Blocked volumes in all parity groups in the external array are formatted.
•
List: Displays information about volumes to be formatted.
• PG: Parity groups containing the volumes to be formatted.
• Blocked Count: Number of blocked volumes to be formatted.
•
OK: Applies the Format All pane settings to the Customized Volume pane, and closes the Format
All pane.
NOTE:
After you click OK, the tree in the Customized Volume pane displays VDEVs immediately below
parity groups containing volumes to be formatted.
•
Cancel: Cancels the settings, and closes the Format All pane.
Write to Control Blocks pane
Use this pane to make external mainframe volumes usable. This pane overwrites control blocks in external
LU in the specified external LU group. Control blocks contain information used for managing volumes.
CAUTION:
Operations in this pane must be performed only on external LUs with data areas that are zero-formatted.
HP StorageWorks LUN Configuration and Security Manager XP user guide for the
XP12000/XP10000/SVS200
199