HP StorageWorks XP10000 Disk Array - Manual (Page 106)

NOTE:
•
You cannot apply LUN security to NAS ports.
• If a port has the External attribute, you cannot apply LUN security to the port.
Enabling LUN security
NOTE:
•
You cannot apply LUN security to NAS ports.
• If a port has the External attribute, you cannot apply LUN security to the port.
1. Start LUN Manager. The LUN Manager pane ( Figure 14 or Figure 15 ) appears.
2. In the tree, locate the port.
3. See the text on the right of the port name to find the LUN security status.
• If LUN security is enabled, you do not need to perform the remaining steps.
• If LUN security is disabled, go to step 4.
4. Right-click the port, and select LUN Security: Disable->Enable. A confirmation message appears.
5. Click Yes. A key is added to the port icon.
6. Click Apply. A confirmation message appears.
7. Click OK. Changes in the security settings are applied to the array.
Disabling LUN security
CAUTION:
Do not disable LUN security on ports when host I/O is in progress.
1. Start LUN Manager. The LUN Manager pane ( Figure 14 or Figure 15 ) appears.
2. In the tree, locate the port.
3. See the text to the right of the port name to find the LUN security status.
• If LUN security is disabled, you do not need to perform the remaining steps.
• If LUN security is enabled, go to step 4.
4. Right-click the port, and select LUN Security: Enable -> Disable. A confirmation message appears.
5. Click YES. The key is removed from the port icon.
6. Click Apply. A confirmation message appears.
7. Click OK. Changes in the security settings are applied to the array.
NOTE:
If LUN security is disabled on a port, host groups corresponding to that port are grayed out in the
tree (except for host group 0).
106 LUN Manager operations