Install cv pane (1) for other than open-v – HP StorageWorks XP10000 Disk Array User Manual

Page 180

Advertising
background image

Figure 93 Install CV pane (1) for other than OPEN-V

This pane has the following features:

Parity Group: Selected free space's VDEV number.

NOTE:

If a parity group number starts with E (for example, E1-1), the parity group consists of one or more

external LUs.

NOTE:

If a VDEV number starts with V (for example, V1-1-(1)), the VDEV belongs to a parity group that

consists of one or more virtual volumes (V-VOLs).

Emulation Type: Emulation type.

Capacity Unit: Unit (MB, Cyl, or block) in which the volume capacity is displayed.

Capacity: CVS volume's capacity in the unit selected in the Capacity Unit list. The available

capacity range (minimum - maximum) is shown on the right (for example, 46 - 6720 MB,

50 - 7168 Cyl, or 315 - 8513 blocks). The value can be incremented by 1 MB, cylinder, or block.

Set: Displays the selected settings in the LDEV information table on the left.

Delete: Deletes the settings for the CVS volumes selected in the LDEV information table.

LDEV information table: Displays the following information about the CVS volume settings:
• No.: CVS volume's setting number.
• Emulation: CVS volume's emulation type.
• Capacity: CVS volume's capacity displayed in the unit selected from the Capacity Unit list.

Available LDEVs: Number of LDEVs that can be created in the VDEV. The maximum is 512 LDEVs

for RAID5 (7D+1P) or RAID6 (6D+2P), and 256 LDEVs for other RAID levels.

Next: Displays the Install CV pane (2).

Cancel: Cancels the selected settings and returns to the Customized Volume pane.

180

Custom Volume Size operations

Advertising