HP XP External Storage Software - Manual (Page 88)

Mapping external LUs individually (Add LU)
This section describes mapping operations starting with the Add LU command. Use the Add LU
(
Figure 42 ), Select Paths ( Figure 43 ), SSID ( Figure 46 ), and Set SSID ( Figure 47 ) panes for mapping
external LUs individually.
NOTE:
Before mapping the external LU, ensure that no other applications (such as RAID Manager XP) that use
the command device are executing. Stop any applications that are executing.
Figure 42 Add LU window
• Vendor
External array's vendor.
• Product
External array's product name.
• Serial
External array's product serial number.
• WWN
World Wide Name of the external array port used for connecting to the local array.
• LUN
LU number of the external LU.
• Device
External LU's device name.
• Ex-Dev. info.
External array information. When the external array is an XP1024/XP128 or TagmaStore
Workgroup Modular Storage (WMS) array, an asterisk (*) appears.
Configuring external LUs 88