HP Command View for Tape Libraries Software User Manual
Page 106
You can change the sample time from the top bar (under the Actions menu) using the predetermined
times or by setting a custom range. In addition, you can select a specific library from the drop-down
box.
The top bar also allows you to refresh, print, and export to PDF the graph. The Actions menu allows
you to refresh the graph and export the report.
NOTE:
Although the start and end dates of the graph run for the entire week or month, only the
data within the selected time period is retrieved. For example, in the week labeled 09/04/2011
to 09/10/2011, if the selected time period begins on 09/08/2011 then only data for the 8th,
9th, and 10th is contained in that week.
If the selected time period is greater than 104 weeks, the data in the graph is grouped by months.
Otherwise, it is grouped in weeks.
Figure 13 Sample Time Range is Less than Two Years
106 Command View TL GUI