Removing a partition – HP Command View for Tape Libraries Software User Manual
Page 154
4.
Follow the instructions in the wizard to create the new partition. Review your choices and click
Finish.
NOTE:
Some devices may not be available to add to the partition depending on your library
configuration, or if those devices are already assigned to another partition.
Removing a partition
To remove a partition from your library:
1.
In the Library window, click the Configuration tab.
2.
In the left panel, select Partitioning. The right panel displays the existing partitions in the
library, if any.
3.
In the right panel, select a partition, and then select Actions
→Remove Selected Partition.
CAUTION:
When you remove a partition, any devices that were in that partition must be
reassigned to the remaining partitions on the library. Devices are unavailable until they are
reassigned to another partition. If you remove all partitions, the library reverts to a
non-partitioned state and all devices are available. Any time you add or remove partitions,
you must reconfigure host access. For more information, see
154 Advanced features in the GUI