HP Command View for Tape Libraries Software - Manual (Page 20)

Table 3 Management station to Interface Manager card network ports
Purpose Port number
TCP inbound 8099
TCP SSL outbound 18098
TCP bidirectional in Command View TL 2.8.00 or lower 8098
By configuring the firewall to enable communication through these ports, the management
station can be on the other side of the firewall from the Interface manager.
See your firewall documentation for instructions on configuring network access.
Table 4 Interface Manger uses this port for SNMP
Purpose Port number
UDP SNMP from SKM bidirectional 161
Servers intending to receive SNMP traps will need to have this port open.
Table 5 Interface Manger uses this port for Network Time Protocol (NTP)
Purpose Port number
TCP and UDP bidirectional 123
Servers intending to use NTP will need to have this port open.
HP recommends that an Secure Key Manager (SKM) or Enterprise Secure Key Manager (ESKM)
appliance (node) use the following network ports to communicate with the SKM or ESKM
management user interface, or for SKM or ESKM communication to other devices. All ports
are TCP and SSL capable.
Table 6 SKM or ESKM network ports
Purpose Port number
SSH login to SKM bidirectional 22
SNMP from SKM bidirectional 161
Interface Manager login to SKM) bidirectional 9000
FIPS status server from SKM bidirectional 9081
SKM networking bidirectional 9001
Web login to SKM bidirectional 9443
Table 7 SMTP port
Purpose Port number
SMTP to send e-mails bidirectional 25
Table 8 LTT service ports
Purpose Port number
LTT Service requests from clients 7999-8099
Used for SSH tunneling 7011-7027
Used for LTT Notification server 7000-7010
20 Command View TL GUI