Show drive productid, Show drive revision, Show drive productid show drive revision – HP Command View for Tape Libraries Software User Manual
Page 223
Operands
Specify the tape drive for which to display interface
information. The interface information may be displayed for
drive_num
all tape drives by specifying all for this operand. This
operand is required.
Examples
To show interface information for drive 1:
/>show drive interface 1
Tape drive interface information:
Drive Number Interface Name FC LUN Bus
---------------- ---------------- ------ ---
Drive 1 myintfc1 1 0
See also
show drive productid
Description
Shows the product ID of one or more tape drives.
Syntax
show drive productid [drive_num] | [all]
Availability
All users and modes
Operands
Specify a tape drive for which to display the product ID. The
tape drive product ID may be displayed for all tape drives by
specifying all for this operand. This operand is required.
drive_num
Examples
To show the product ID for all tape drives:
/>show drive productid all
Tape drive product ID:
Drive Number Product ID
---------------- ----------------
Drive 1 Ultrium 1-SCSI
See also
show drive revision
Description
Shows the firmware revision of one or more tape drives.
Syntax
show drive revision [drive_num] | [all]
Availability
All users and modes
Operands
Specify a tape drive for which to display the firmware revision.
The tape drive firmware revision may be displayed for all tape
drive_num
show drive productid 223