HP Command View for Tape Libraries Software User Manual
Page 171
3.
Double-click the library on which you want to change the key manager.
4.
Click the Configuration tab.
5.
In the left panel, select Key Management.
NOTE:
The Key Management command will only appear if you have Advanced Secure
Manager (see
) and LTO4 and later tape drives installed in your
library (in the Library window, click the Status tab, then in the left panel, click Advanced LTO
Drives).
6.
Select Actions+Transfer current SKM enrollment settings to ESKM
→Reuse SKM Certificate
Authority and client certificate.
If Create new Certificate Authority and client certificate is selected, then certificates generated
when SKM was installed will be deleted, and the upgrade will proceed as a new enrollment.
See
“Selecting the SKM or ESKM as the key manager” (page 160)
.
7.
Read and follow the text on the screen that appears, then click Next.
8.
Enter the library user name and password in the appropriate fields, then click Next.
Tier information appears.
9.
If appropriate, select the box to reuse pre-existing SKM tiers.
10. If appropriate type the appropriate SSL port number for nodes in the tier in the SSL Port Number
for nodes field.
11. Type the IP addresses or hostnames for any nodes that were added.
12. Delete the information for any nodes that were removed.
13. If appropriate, add a tier to the Key Manager Configuration using the following procedure:
1.
Click Add Tier.
2.
Type the ESKM Node Address for each node on the tier.
3.
Click Next.
4.
Verify the information is correct, then click Next.
5.
At the Reboot Warning dialog box, read the warning, then click Yes.
Encrypting data with the HP StorageWorks Secure Key Manager (SKM) or HP Enterprise Secure Key Manager (ESKM)
171