HP Command View for Tape Libraries Software - Manual (Page 232)

Interface Name Date Time
---------------- ---------- -----
myintfc1 12/14/2002 13:02
myintfc2 12/14/2002 13:01
***************************************************************
Interface connection type:
Interface Name Connection Type
---------------- ---------------
myintfc1 fabric
myintfc2 fabric
***************************************************************
Interface event mask: (Only displayed for service user)
Interface Name Event Mask
---------------- ---------------
myintfc1 0xFF
myintfc2 0x01
***************************************************************
Interface Fibre Channel discovery mode: (Only displayed for service user
or manual mode)
Interface Name Fibre Channel Discovery Mode
---------------- ----------------------------
myintfc1 reboot
myintfc2 reboot
***************************************************************
Interface name information:
Interface # Node WWN Port WWN Current Name
----------- ---------------- ---------------- ----------------
1 11111111111111CC 11111111111111DD myhost1
2 22222222222222CC 22222222222222DD myhost2
***************************************************************
Interface initiator ID(s):
Interface Name Initiator ID(s)
---------------- ----------------------------
myintfc1 6, 7
myintfc2 7
***************************************************************
Interface port mode:
Interface Name Port Mode
---------------- ----------------------------
myintfc1 nport
myintfc2 hard
***************************************************************
Interface port speed: (Only displayed for service user or manual mode)
Interface Name Port Speed
---------------- ----------------------------
myintfc1 1 Gbpsec
myintfc2 1 Gbpsec
***************************************************************
Interface firmware revision:
Interface Name Firmware revision
---------------- -----------------
myintfc1 2.00
myintfc2 2.00
***************************************************************
Interface SCSI device discovery: (Only displayed for service user)
Interface Name SCSI Device Discovery
---------------- ---------------------
myintfc1 enabled
myintfc2 enabled
***************************************************************
Interface SCSI device discovery delay: (Only displayed for service user)
Interface Name SCSI Device Discovery Delay
---------------- ---------------------------
myintfc1 300 seconds
myintfc2 300 seconds
***************************************************************
Interface statistics gathering: (Only displayed for service user)
Interface Name Statistics Gathering
---------------- ---------------------
myintfc1 enabled
myintfc2 enabled
***************************************************************
Interface target reset mode: (Only displayed for service user or manual mode)
Interface Name Target Reset Mode
---------------- -----------------
myintfc1 standard
myintfc2 standard
***************************************************************
Interface trace level: (Only displayed for service user)
Interface Name Trace Levels
232 CLI Command Reference