HP Command View for Tape Libraries Software - Manual (Page 90)

Table 26 Information available from the LTO Tape Properties window Overview tab (continued)
Description Item
The serial number that uniquely identifies the tape
cartridge. Defined by the tape manufacturer. Serial Number
Identifies the data format supported by the tape. Format
The manufacturer of the cartridge. Vendor
The maximum capacity of the tape. Capacity
Configuration
Indicates whether the cartridge contains encrypted data
or not. Encrypted Data
Indicates whether this is a WORM cartridge—Write
Once Read Many. Data written to these cartridges
cannot be overwritten or erased. WORM
7. Click the Health tab to view the following information about the selected tape.
Table 27 Information available from the LTO Tape Properties window Health tab
Description Item
Health
The average quality of write operations for a tape,
based on one write pass of the tape (in either the
forward or reverse direction). Effective Capacity (Average)
The lowest value for write operations of the tape, based
on one write pass. Effective Capacity (Worst Case)
Life
90 Command View TL GUI