HP Command View for Tape Libraries Software - Manual (Page 22)

Table 9 User names and default passwords
Default password User name
security security
admin admin
NOTE: Multiple users can log in at the same time. If one user is modifying the settings for a
library, other modify operations for that library will be denied.
Using Command View TL
The Launcher window has the following menu tabs in the lower left corner:
•
Devices—Displays a list of libraries and virtual tape libraries that can be managed by
Command View TL. You can add or delete libraries from this list, or select a library to manage.
•
TapeAssure—Displays a consolidated summary of drive and tape utilization, advanced health,
and performance, for every drive and tape on every library using this management station as
its primary management station. It also includes data on the number of uses remaining on the
cleaning tapes in these libraries.
•
Administration—Displays the network settings of the management station. You can configure
these settings.
•
Licensing—Provides a convenient way to track and safely store any additional license keys
you have purchased for use with tape libraries.
Figure 5 The Launcher window
NOTE: For each library, the status column displays messages such as “Firmware update in
progress” or “Cannot communicate with library”. It there are no messages to display, the status
column displays the name of the management station that is managing the library or if the library
is not currently managed, “Ready to manage”.
Licensing Notes
On initial installation of the Command View TL, you have a 60–day instant-on license period and
a subsequent 30–day grace period to install the TapeAssure Advanced license.
22 Command View TL GUI