Editing an snmp trap, Removing an snmp trap, Editing an snmp trap removing an snmp trap – HP Command View for Tape Libraries Software User Manual
Page 133
3.
In the left panel, select SNMP Alerts. The current SNMP traps appear in the right panel.
4.
Select Actions
→Add Trap Entry.
The SNMP Trap Entry dialog box appears.
5.
Enter the Trap Destination and Community String, and then click OK.
Editing an SNMP trap
To edit an existing trap entry:
1.
In the Library window, click the Configuration tab.
2.
In the left panel, select SNMP Alerts. The current SNMP traps appear in the right panel.
3.
Do one of the following:
•
In the right panel, double-click a trap entry.
•
In the right panel, select the trap entry to be modified, and then select Actions
→Edit Trap
Entry.
The SNMP Trap Entry dialog box appears.
4.
Modify the Trap Destination and Community String as necessary, and then click OK.
Removing an SNMP trap
To remove an existing trap entry:
1.
In the Library window, click the Configuration tab.
2.
In the left panel, click SNMP Alerts. The current SNMP traps appear in the right panel.
3.
In the right panel, select the trap entry that you want to remove, and then select
Actions
→Remove Trap Entry.
4.
Confirm that you want to delete the SNMP trap.
Using SNMP alerts
133