HP Command View for Tape Libraries Software - Manual (Page 72)

1. The Drive Selection section, the Select Drives table shows each library; click a library to see
the drives listed for it. Select the drives of interest and use the >> button to move them to the
Selected Drives table. You can remove a drive from the Selected Drives table using the <<
button.
2. In the Time Scale section, you select the filter criteria (known as the computational argument)
for use in the comparison. When you choose one of the following, additional selection criteria
are provided:
•
Day of Week — select a start and end date, select the days of the week of interest, then
select the time period for each day.
72 Command View TL GUI