HP Color LaserJet 4700 Printer series - Manual (Page 119)

media sizes: 8.5 x 13 and Executive (JIS), double Japan postcard, and custom. The printer automatically
detects the media size in these trays based on the tray’s paper guide configuration. (See
Supported
media weights and sizes .)
CAUTION The paper path for the optional trays passes through Tray 2. If Tray 2 is partially
pulled out or removed, paper from Tray 3 cannot feed into the printer. The printer will stop and
generate a message that Tray 2 must be installed. Similarly, all trays installed above the tray that
is being used must be closed for paper to feed into the printer.
Loading detectable standard-sized media into Tray 2 and optional
trays
CAUTION If paper is loaded in Trays 3 through 6 when the printer is in sleep mode, the new
paper will not be sensed when the printer comes out of sleep mode. This could cause the wrong
paper to be used for a print job. Be sure to wake the printer before loading paper in these trays.
The following detectable standard-sized media is supported in Tray 2 and the optional trays: letter, legal,
executive, A4, A5, and (JIS) B5.
CAUTION Do not print cardstock, envelopes, heavy or extra heavy paper, or unsupported sizes
of media from the 500-sheet trays. Print on these types of media only from Tray 1. Do not overfill
the input tray or open it while it is in use. Doing so can cause jams in the printer.
1. Remove the tray from the printer.
NOTE After sliding the tray out, lift the tray up slightly to remove it.
ENWW Configuring input trays 103