HP Color LaserJet 4700 Printer series - Manual (Page 85)

7. Press to select TRAY BEHAVIOR.
8. Press to highlight DUPLEX BLANK PAGES.
9. Press or to select AUTO or YES.
10. Press to set the behavior.
11. Press Menu .
Setting the printer to rotate images
1. Press Menu to enter the MENUS.
2. Press to highlight CONFIGURE DEVICE.
3. Press to select CONFIGURE DEVICE.
4. Press to highlight SYSTEM SETUP.
5. Press to select SYSTEM SETUP.
6. Press to highlight TRAY BEHAVIOR.
7. Press to select TRAY BEHAVIOR.
8. Press to highlight IMAGE ROTATION.
9. Press or to select STANDARD or ALTERNATE.
10. Press to set the behavior.
11. Press Menu .
Sleep delay
The adjustable sleep mode feature reduces power consumption when the printer has been inactive for
an extended period. You can set the length of time before the printer enters sleep mode to 1 MINUTE,
15 MINUTES, 30 MINUTES, 45 MINUTES, 60 MINUTES, 90 MINUTES, 2 HOURS, or 4 HOURS. The
default setting is 1 MINUTES.
NOTE The printer display dims when the printer is in sleep mode. This mode does not affect
printer warm-up time.
Setting sleep delay
1. Press Menu to enter the MENUS.
2. Press to highlight CONFIGURE DEVICE.
3. Press to select CONFIGURE DEVICE.
4. Press to highlight SYSTEM SETUP.
5. Press to select SYSTEM SETUP.
6. Press to highlight SLEEP DELAY.
7. Press to select SLEEP DELAY.
ENWW Changing printer control panel configuration settings 69