HP Color LaserJet 4700 Printer series - Manual (Page 77)

Menu item Values Description
DLC/LLC: Select whether the DLC/LLC
protocol stack is enabled or disabled.
SECURE WEB: Specify whether the
embedded Web server accepts
communications by using only secure
HTTP (HTTPS) or by using both HTTP and
HTTPS.
DIAGNOSTICS: Provides tests to help
diagnose network hardware or TCP/IP
network connection problems.
RESET SECURITY: Specifies whether the
current security settings on the print server
are saved or reset to factory defaults.
LINK SPEED: Selects the network link
speed and communication mode for the
10/100T print server. To ensure proper
communication, the Jetdirect settings must
match those of the network.
EIO X
(Where X=1 or 2)
The values may vary. Possible
values may include:
TCP/IP
IPX/SPX
APPLETALK
DLC/LLC
SECURE WEB
RESET SECURITY
LINK SPEED
TCP/IP: Select whether the TCP/IP
protocol stack is enabled or disabled. You
can set several parameters.
Select the TCP/IP CONFIGURE
METHOD to configure the EIO card. For the
MANUAL option, select the values for IP
ADDRESS, SUBNET MASK, LOCAL
GATEWAY, and DEFAULT GATEWAY.
IPX/SPX: Select whether the IPX/SPX
protocol stack (in Novell NetWare
networks, for example) is enabled or
disabled.
APPLETALK: Enable or disable an
AppleTalk network.
DLC/LLC: Select whether the DLC/LLC
protocol stack is enabled or disabled.
SECURE WEB: Specify whether the
embedded Web server accepts
communications by using only secure
HTTP (HTTPS) or by using both HTTP and
HTTPS.
DIAGNOSTICS: Provides tests to help
diagnose network hardware or TCP/IP
network connection problems.
RESET SECURITY: Specifies whether the
current security settings on the print server
are saved or reset to factory defaults.:
LINK SPEED: Selects the network link
speed and communication mode for the
10/100T print server. To ensure proper
ENWW Configure device menu 61