HP Color LaserJet 4700 Printer series - Manual (Page 144)

To manually print on two sides (duplex)
1. Ensure that the printer driver is configured to allow manual duplexing. For more information, see
Printer drivers or Printer drivers for Macintosh computers . In the printer driver, select Allow Manual
Duplex.
2. From the application, open the printer driver.
3. Select the appropriate size and type.
4. On the Finishing tab, click Print on Both Sides or Print on Both Sides (Manually).
5. The default binding option is to bind on the long edge of the paper in portrait layout. To change the
setting, click the Finishing tab, and select the Flip pages up checkbox.
6. Click OK. The Print on Both Sides instructions will appear. Follow the instructions to finish printing
your document.
NOTE If the total number of sheets to be duplexed exceeds the Tray 1 capacity for manual
duplex jobs, feed the top 100 sheets and press . When prompted, feed the next 100 sheets and
press . Repeat as necessary until all the sheets from the output stack have been loaded into
Tray 1.
For more information, see Printer drivers or Printer drivers for Macintosh computers .
Printing booklets
Some versions of the printer driver let you control the printing of booklets when duplexing. You can
select binding on the left or right side on letter, legal, or A4 paper size. Windows 2000 and XP supports
booklet printing for all paper sizes.
See the printer driver online Help for more information about the printing booklets feature.
128 Chapter 4 Printing tasks ENWW