HP Color LaserJet 4700 Printer series User Manual
Page 221
Control panel message
Description
Recommended action
●
Close the top cover.
●
Supplies ordering information is
also available from the embedded
Web server. See
for more
information.
REPLACE STAPLER
CARTRIDGE
●
The stapler cartridge contains fewer
than 30 staples and should not be used.
The stapler cartridge needs to be
replaced.
●
There is no stapler cartridge installed.
●
Replace the stapler cartridge. For more
information, see
●
Install a stapler cartridge.
REPLACE SUPPLIES
For status press
The supplies gauge will display the
consumption levels of print cartridges.
Multiple supplies are at the end of their useful
life. If the supplies affected are cartridges
only, printing has stopped because the
REPLACE SUPPLIES setting in the
SYSTEM SETUP menu is set to STOP AT
OUT. If the affected supplies are cartridges
only, printing will not continue.
1.
Press to access the SUPPLIES
STATUS menu.
2.
Press and to highlight the specific
supply that has a problem.
3.
Press to view help for the supply.
4.
Press and to step through the
instructions.
5.
Supplies ordering information is also
available from the embedded Web
server. See
for more information.
REPLACE SUPPLIES
Override in use
alternates with
<Current status message>
The printer is set to continue printing even
though a print cartridge has reached end of
life.
CAUTION
Using the Override
mode may result in unsatisfactory
print quality. HP recommends
replacing the supply when the
REPLACE SUPPLY message is
displayed. HP Supplies Premium
Protection Warranty coverage ends
when a supply is used in Override
mode.
Press to see step by step information.
REPLACE SUPPLIES
To continue press
The supplies gauge will display the
consumption levels of print cartridges.
Multiple supplies are at the end of their useful
life and the REPLACE SUPPLIES setting in
the SYSTEM SETUP menu is set to STOP
AT LOW.
1.
Press to access the SUPPLIES
STATUS menu.
2.
Press and to highlight the specific
supply that has a problem.
3.
Press to view help for the supply.
4.
Press and to step through the
instructions.
5.
Supplies ordering information is also
available from the embedded Web
server. See
for more information.
REPLACE SUPPLIES
This message is generated when a print
cartridge (or print cartridges) has reached the
Press to see step by step information.
ENWW
Control panel messages
205