HP Color LaserJet 4700 Printer series - Manual (Page 60)

Indicator Solid Blinking Off
paper, or staple the job
manually. MIXED
PAPER SIZES IN JOB
TO STAPLE appears on
the printer control panel
display.
Amber ● The accessory is
experiencing a hardware
malfunction.
For more information,
see
Control panel
messages .
● The device requires user
intervention. The bin
could be full, there could
be a stapler jam, or the
stapler cartridge could
require replacement. For
more information, see
Control panel
messages
.
If the message
CORRUPT FIRMWARE
IN EXTERNAL
ACCESSORY appears,
download the firmware
again.
● There is a paper jam, or
a sheet needs to be
removed from the unit,
even if the sheet is not
jammed. For more
information, see
Jams in
the stapler/stacker .
● The bin is full. Empty the
bin before continuing.
● There are fewer than 30
staples remaining in the
stapler cartridge. To
avoid jams, these
staples should not be
used. Order and install a
new stapler cartridge
before continuing.
● The bin is in the up
position. Lower the bin
before continuing.
● The jam access door is
open. Close the door
before continuing.
● The stapler unit is open.
Close the unit before
continuing.
N/A
44 Chapter 2 Control panel ENWW