HP Photosmart C6280 All-in-One Printer - Manual (Page 117)

I received a message on the display about a paper jam or a blocked print head
assembly
Cause: The HP All-in-One has a paper jam.
Solution: Clear the paper jam, and then follow the prompts on the display or the
computer screen to continue.
For more information, see:
“Clear paper jams” on page 111
Cause: The print head assembly is blocked.
Solution: There might be some packing material inside the HP All-in-One. Turn the
HP All-in-One off and open the ink cartridge door. Remove any objects that are
blocking the print head assembly (including any packing materials), and then turn the
HP All-in-One on again. Follow the prompts on the display or the computer screen to
continue.
Software installation troubleshooting
Use this section to solve any problems you might encounter while setting up the HP All-
in-One software.
This section contains the following topics:
• When I insert the CD-ROM into my computer’s CD-ROM drive, nothing happens
• The minimum system checks screen appears
• A red X appears on the USB connect prompt
• I received a message that an unknown error has occurred
• The registration screen does not appear
• Uninstall and reinstall the software
• Missing HP Photosmart Software
When I insert the CD-ROM into my computer’s CD-ROM drive, nothing happens
Cause: The installation failed to run automatically.
Solution: If the installation does not run automatically, you can start it manually.
To start the installation from a Windows computer
1. From the Windows Start menu, click Run.
2. In the Run dialog box, enter d:\setup.exe, and then click OK.
If your CD-ROM drive is not assigned to drive letter D, enter the appropriate drive
letter.
The minimum system checks screen appears
Cause: Your system does not meet the minimum requirements to install the
software.
Chapter 14
116 Troubleshooting
T
roub
les
hoot
ing