HP Photosmart C6280 All-in-One Printer - Manual (Page 86)

10 Use the copy features
The HP All-in-One enables you to produce high-quality color and black-and-white copies
on a variety of paper types, including transparencies. You can enlarge or reduce the size
of an original to fit a specific paper size, adjust the darkness of the copy, and use special
features to make high-quality copies of photos, including borderless copies.
TIP: For the best copy performance on standard copy projects, set the paper size
to Letter or A4, the paper type to Plain Paper, and the copy quality to Fast.
This section contains the following topics:
• Make a copy
• Preview your copy job
• Change the copy settings for the current job
• Change default copy settings
• Perform special copy jobs
• Stop copying
Make a copy
You can make quality copies from the control panel.
To make a copy from the control panel
1. Make sure you have paper loaded in the input tray.
2. Load your original print side down on the right front corner of the glass.
3. Press Start Copy Black or Start Copy Color to begin copying.
Preview your copy job
After changing settings on the HP All-in-One for making a copy, you can preview an image
of the expected output on the display before starting the copy.
NOTE: You must explicitly pick your copy settings to ensure an accurate preview.
Automatic settings will not reflect the loaded paper size and type, but use defaults
instead.
Previews appear when you select Preview on the Copy Menu, or when you use the crop
feature to specify a specific area of the original to copy.
To preview your copy from the control panel
1. Press Copy Menu.
The Copy Menu appears.
2. Change copy settings on the HP All-in-One to accurately reflect the copy you want to
make.
Use the copy features 85
Co
py