Uninstall and reinstall the software, The registration screen does not appear – HP Photosmart C6280 All-in-One Printer User Manual
Page 119
in-One application files from your computer. Make sure to remove them properly using
the uninstall utility provided when you installed the software that came with the HP All-
in-One.
For more information, see:
“Uninstall and reinstall the software” on page 118
The registration screen does not appear
Cause: The registration screen did not launch automatically.
Solution: You can access the registration (Sign up now) screen from the Windows
taskbar by clicking Start, pointing to Programs or All Programs, HP, Photosmart
C6200 All-in-One series, and then clicking Product Registration.
Uninstall and reinstall the software
If your installation is incomplete, or if you connected the USB cable to the computer before
prompted by the software installation screen, you might need to uninstall and then
reinstall the software. Do not simply delete the HP All-in-One application files from your
computer. Make sure to remove them properly using the uninstall utility provided when
you installed the software that came with the HP All-in-One.
To uninstall from a Windows computer, method 1
1.
Disconnect the HP All-in-One from your computer. Do not connect the HP All-in-One
to your computer until after you have reinstalled the software.
2.
On the Windows taskbar, click Start, Programs or All Programs, HP, Photosmart
C6200 All-in-One series, Uninstall.
3.
Follow the onscreen instructions.
4.
If you are asked whether you would like to remove shared files, click No.
Other programs that use these files might not work properly if the files are deleted.
5.
Restart your computer.
NOTE:
It is important that you disconnect the HP All-in-One before restarting
your computer. Do not connect the HP All-in-One to your computer until after you
have reinstalled the software.
6.
To reinstall the software, insert the HP All-in-One CD-ROM into your computer’s CD-
ROM drive, and follow the onscreen instructions and the instructions provided in the
Setup Guide that came with the HP All-in-One.
7.
After the software is installed, connect the HP All-in-One to your computer.
8.
Press the On button to turn the HP All-in-One on.
After connecting and turning on the HP All-in-One, you might have to wait several
minutes for all of the Plug and Play events to complete.
9.
Follow the onscreen instructions.
Chapter 14
118
Troubleshooting
T
roub
les
hoot
ing