HP Deskjet F4240 All-in-One Printer - Manual (Page 130)

Copy troubleshooting
Use this section to solve these copy problems:
• Nothing happens when I try to copy
• Parts of the original do not appear or are cut off
• The printout appears enlarged on the page
• The printout is blank
• A borderless copy has white space around the edges
Nothing happens when I try to copy
Try the following solutions to resolve the issue. Solutions are listed in order, with the most
likely solution first. If the first solution does not solve the problem, continue trying the
remaining solutions until the issue is resolved.
• Solution 1: Make sure that the product is turned on
• Solution 2: Make sure that the original is placed correctly on the glass
• Solution 3: Wait for the product to finish other tasks
• Solution 4: Make sure the paper loaded is recognized by the product
• Solution 5: Check for a paper jam
Solution 1: Make sure that the product is turned on
Solution: Look at the On button located on the product. If it is not lit, the product is
turned off. Make sure the power cord is firmly connected to the product and plugged
into a power outlet. Press the On button to turn on the product.
Cause: The product was turned off.
If this did not solve the issue, try the next solution.
Solution 2: Make sure that the original is placed correctly on the glass
Solution: Load your original print side down on the right front corner of the glass.
Cause: The original was placed incorrectly on the glass.
Copy troubleshooting 127
Trou
bles
ho
ot
ing