Parts of the original do not appear or are cut off, Solution 5: check for a paper jam – HP Deskjet F4240 All-in-One Printer User Manual
Page 131
If this did not solve the issue, try the next solution.
Solution 3: Wait for the product to finish other tasks
Solution: Check the On light. If it is blinking, the product is busy.
If the product is performing another task such as printing or scanning, your copy job
will be delayed until the product completes the current task.
Cause: The product was busy with another task.
If this did not solve the issue, try the next solution.
Solution 4: Make sure the paper loaded is recognized by the product
Solution: Do not use the product to copy onto envelopes or other papers the
product does not support.
Related topics
Recommended papers for printing and copying
Cause: The product did not recognize the inserted paper type.
If this did not solve the issue, try the next solution.
Solution 5: Check for a paper jam
Solution: Clear the paper jam.
For more information, see:
Cause: The product had a paper jam.
Parts of the original do not appear or are cut off
Try the following solutions to resolve the issue. Solutions are listed in order, with the most
likely solution first. If the first solution does not solve the problem, continue trying the
remaining solutions until the issue is resolved.
•
Solution 1: Place the original correctly on the glass
•
Solution 2: Clean the scanner glass
Chapter 12
128
Troubleshooting
T
roub
les
hoot
ing