HP Deskjet F4240 All-in-One Printer User Manual
Page 63
3.
Press the Paper Selection button to select either Photo (Large) or Photo (Small)
depending on the size of the paper loaded in the input tray.
NOTE:
When copying a 10 x 15 cm (4 x 6 inch) original with 216 x 280 mm (8.5
x 11 inch) media loaded in the input tray, press Enlarge/Fit to Page to print a
borderless and enlarged copy of the original.
4.
Press Start Copy Color.
The product makes a borderless copy of your original photo as shown below.
Related topics
Copy a two-page black-and-white document
You can use the HP All-in-One to copy a single- or multiple-page document in color or
black and white. In this example, the HP All-in-One is used to copy a two-page black-
and-white original.
To copy a two-page document from the control panel
1.
Make sure you have paper loaded in the input tray.
2.
Load your original print side down on the right front corner of the glass.
TIP:
For quality copies, ensure that the scanner glass is clean and that there are
no foreign materials adhering to it. For more information, see
3.
Press the Paper Selection button to set the paper type.
4.
Press Start Copy Black.
5.
Wait until the product has finished printing the first page. Remove the first page from
the glass and load the second page.
6.
Press Start Copy Black.
Chapter 8
60
Use the copy features
U
se th
e co
py f
eatu
res