HP Color LaserJet 4730 Multifunction Printer series - Manual (Page 125)

Control panel settings for automatic two-sided printing
Many software applications allow you to change two-sided print settings. If your software application or
printer driver does not allow you to adjust two-sided printing settings, you can adjust these settings
through the control panel. The factory default setting is OFF.
CAUTION Do not use two-sided printing when printing on labels. Serious damage may result.
To enable or disable two-sided printing from the MFP control panel
NOTE Changing settings for two-sided printing through the MFP control panel affects all print
jobs. Whenever possible, change settings for two-sided printing through your software application
or printer driver.
NOTE Any changes made in the printer driver will override settings made using the MFP control
panel.
1. Press Menu to enter the MENUS.
2. Scroll to and touch CONFIGURE DEVICE .
3. Scroll to and touch PRINTING
4. Touch DUPLEX .
5. Touch ON to enable two-sided printing or OFF to disable automatic two-sided printing.
6. Touch Menu .
7. Select two-sided printing from your software application or printer driver, if possible.
NOTE To select two-sided printing from the printer driver, the driver must first be properly
configured. For more information, see Printer drivers or Printer drivers for Macintosh computers .
ENWW Automatic two-sided (duplex) printing 105