HP Color LaserJet 4730 Multifunction Printer series - Manual (Page 133)

1 3–bin mailbox output bins
2 ADF output bin (for copy originals)
You can set up these options in the CONFIGURE DEVICE menu, on the MBM-3 CONFIGURATION
submenu. This menu is available only when the 3-bin mailbox is installed. For more information about
using the 3-bin mailbox, see
3-bin mailbox .
The top two bins each hold up to 100 sheets of paper. A sensor causes the MFP to stop when the bin
is full. MFP operation continues when you empty or reduce the amount of media in the bin.
The lower bin holds up to 500 sheets of paper.
Selecting an output location
It is recommended that you select an output location (bin) through your program or driver. Where and
how you make selections depends on your program or driver. If you cannot select an output location
from the program or driver, set the default output location from the MFP control panel.
To select an output location at the control panel
1. Press Menu .
2. Scroll to and touch CONFIGURE DEVICE .
3. Scroll to and touch PRINTING .
4. Scroll to and touch PAPER DESTINATION to view the output bin options.
5. Scroll to and touch the output bin that you want. The message Setting saved appears on the
control-panel display for a moment.
ENWW Selecting the output bin 113