HP Color LaserJet 4730 Multifunction Printer series - Manual (Page 130)

Special printing situations
Use these guidelines when printing on special types of media.
Printing a different first page
Use the following procedure to print the first page of a document on a different media type than the rest
of the document, for example, to print the first page of a document on letterhead paper and the rest on
plain paper.
1. From your application or printer driver, specify a tray for the first page and another tray for the
remaining pages.
For more information, see Printer drivers or Printer drivers for Macintosh computers .
2. Load the special media into the tray that you specified in step 1.
3. Load the media for the remaining pages of the document into another tray.
You can also print on different media by using the MFP control panel or printer driver to set the types
of media that are loaded in the trays and then selecting the first and remaining pages by media type.
Printing a blank back cover
Use the following procedure to print a blank back cover. You can also select an alternate paper source
or print on a different media type than the rest of the document.
1. On the printer driver’s Paper tab, select Use different paper, then from the drop-down list, select
Back Cover, check Add a blank back cover, and then click OK.
2. For more information, see Printer drivers or Printer drivers for Macintosh computers .
You can also select an alternate paper source or print a blank back cover on a different media type than
the rest of the document. If desired, select a different source and type from the drop-down lists.
Printing on custom-size media
The MFP supports single-sided printing on custom-size media. Tray 1 supports media sizes from 76 x
127 mm (3 x 5 inches) to 216 x 356 mm (8.5 x 14 inches). Trays 2, 3, and 4 support media sizes from
148 x 210 mm (5.83 x 8.27 inches) (A5 size) to 216 x 356 mm (8.5 x 14 inches).
When printing on custom-size media, if Tray 1 is configured in the MFP control panel as TRAY X TYPE=
ANY TYPE and TRAY X SIZE= ANY SIZE, the MFP will print on whatever media is loaded in the tray.
When printing on custom-size media from Tray 2, 3, or 4, adjust the switch on the tray to the
CUSTOM position, and from the control panel, set the media size to CUSTOM or ANY CUSTOM.
Some software applications and printer drivers allow you to specify custom paper-size dimensions. You
can configure custom paper sizes from the printer driver’s Paper tab or Forms tab (Windows 2000 and
XP). Be sure to set the correct paper size in both the page setup and print dialog boxes.
For more information, see Printer drivers or Printer drivers for Macintosh computers .
If your software application requires you to calculate margins for custom-size paper, see the online Help
for that application.
110 Chapter 4 Printing tasks ENWW