HP Color LaserJet 4730 Multifunction Printer series - Manual (Page 75)

Item Values Explanation
OFF: The MFP does not reprint pages
following a jam. Printing performance
might be increased with this setting.
ON: The MFP automatically reprints
pages after a jam is cleared.
LANGUAGE List of available languages Sets the language of the control panel.
Copy/send settings
This table lists the options that are available for the COPY SEND SETTINGS, which are part of the
SYSTEM SETUP submenu.
Item Values Explanation
INACTIVITY TIMEOUT 10–300 SECONDS Defines the amount of time until the copy settings return to the
default settings after any control panel activity is completed. If
you reset the MFP, the value resets to the default.
Default=60
AUTO SETTINGS RESET OFF*
ON
Allows automatic reset of copy/send settings after the defined
timeout. When set to OFF, you are prompted to reset the
settings or continue with the same settings. If this item is set
to ON, the settings are automatically reset after each send job.
The default is OFF.
TIMEOUT AFTER SEND 10–300 SECONDS Defines the amount of time before the send settings return to
the default settings after any control-panel activity is
completed. This item displays only when AUTO SETTINGS
RESET is OFF.
Default=20
HOLD OFF PRINT JOB OFF
ON*
Prevents network print jobs from starting within a specified
period after a copy is completed.
HOLD OFF TIME 0–300 SECONDS Defines the amount of time that print jobs must wait if HOLD
OFF PRINT JOB is set to ON.
Default=15
SCAN AHEAD OFF
ON*
Allows a copy job to be scanned even if the MFP is printing
another job. The job will be scanned and held until it can be
printed. If this setting is set to OFF, the job is not scanned until
the print job is completed.
AUTO JOB INTERRUPT OFF*
ON
Allows a copy job to automatically interrupt any currently
printing network print job. The copy job is placed between full
copies of the job that is currently printing. If this setting is set
to OFF, the job is not printed until all copies of the print job are
completed.
COPY JOB INTERRUPT OFF*
ON
Allows you to interrupt the current copy job to make a different
copy. When you press the
Start button, the MFP shows a
message that asks if you want to interrupt the current copy job.
ENWW Configure device menu 55