HP Color LaserJet 4730 Multifunction Printer series - Manual (Page 66)

Item Values Options Explanation
150 dpi*
200 dpi
300 dpi
DPI setting results in a smaller
file size, but image quality
might be affected.
ADDRESS VALIDATION OFF
ON*
Enables the MFP to check e-
mail syntax. Valid e-mail
addresses require the "@"
sign and a ".".
FIND SEND GATEWAYS The MFP searches the
network for SMTP and LDAP
gateways that the MFP can
use to send e-mail.
SMTP GATEWAY The IP address of the SMTP
server used to send e-mail.
LDAP GATEWAY The IP address of the LDAP
gateway that the MFP uses to
look up e-mail information.
TEST SEND GATEWAYS Tests the configured
gateways to see if they are
functional.
REPLICATE MFP Copies the send settings from
one MFP to another.
NOTE This feature
might not work with
older MFPs.
Printing submenu
Some items in the Printing submenu are available in a software program, or in the printer driver (if the
correct printer driver is installed). Driver and program settings override control-panel settings.
To gain access to this menu, touch CONFIGURE DEVICE , and then touch PRINTING .
Item Values Explanation
COPIES 1 to 32,000 Set the default number of copies by
selecting any number from 1 to 32,000.
Use the numeric keypad to select the
number of copies.
NOTE It is recommended
that you set the number of
copies in the printer driver or
in the software program.
(Printer driver settings and
software program settings
override control-panel
settings.)
46 Chapter 2 Using the control panel ENWW