Replacing accessories or accessory components – HP Color LaserJet 4730 Multifunction Printer series User Manual

Page 319

Advertising

Light

Explanation and solution

●

The accessory might have been disconnected and reconnected while the MFP
power was on. REINSTALL OUTPUT DEVICE appears on the control-panel
display. Reconnect the cable on the accessory.

●

The job might have stalled between the MFP and the accessory.
Processing... appears on the control-panel display. Turn the MFP power off
and then on.

Replacing accessories or accessory components

If you are unable to resolve problems that are indicated by the 3-bin mailbox or stapler/stacker accessory
lights, contact the HP Customer Care Center. (See

HP customer care

.) If an HP Customer Care Center

representative recommends replacement of the 3-bin mailbox, the stapler/stacker, or the staple
cartridge, see

Ordering parts, accessories, and supplies

and

Part numbers

for information about

ordering a replacement.

●

For the steps to replace the entire 3-bin mailbox or the entire stapler/stacker, see the install guide
that came with the accessory.

●

For the steps to replace the staple cartridge, see