HP Color LaserJet 4730 Multifunction Printer series - Manual (Page 155)

Copying by using the scanner glass
Use the scanner glass to copy small, lightweight (less than 60 g/m 2 (16 lb)), or irregularly-sized originals
such as receipts, newspaper clippings, photographs, or old or worn documents.
1. Place the document face-down on the scanner glass.
2. Make any image modifications, and select any copy settings, if necessary.
3. If you are making only one copy, press Start . If you are making multiple copies, use the numeric
keypad to type the number of copies (up to 999), and then press Start to begin copying. If you are
copying more than one page from the scanner glass, see Using Job Mode to make a multi-page
copy job.
Copying by using the ADF
Use the ADF to make as many as 999 copies of a document that has up to 50 pages (depending on the
thickness of the pages).
1. Load the document face-up in the ADF.
2. Make any image modifications, and select any copy settings.
3. If you are making only one copy, press Start . If you are making multiple copies, use the numeric
keypad to type the required number of copies, and then press Start .
The ADF can distinguish between letter- and legal-sized original documents. If the document that you
are copying has mixed sizes, specify
MIXED LTR/LGL in the Describe Original settings. Copying is
slower when using this feature.
Using Job Mode
Use the Job Mode feature to build a single copy job from multiple scans. You can use either the ADF
or the scanner glass. The settings for the first scan are used for subsequent scans.
1. Touch COPY .
2. Touch Describe Original .
3. Touch Advanced... .
4. In the JOB MODE check box, touch ON .
5. Select any output settings, if necessary.
6. After each page is scanned, the control panel prompts you for more pages.
7. If the job contains more pages, load the next page, and then press Start .
8. If the job contains no more pages, touch FINISHED to print.
NOTE In Job Mode, if you scan the first page of a document by using the ADF, then you must
scan all of the pages in that document by using the ADF. If you scan the first page of a document
by using the scanner glass, then you must scan all of the pages in that document by using the
scanner glass.
ENWW Basic copying instructions 135